“YAMAYO” IMPORTED DIGITAL PORTABLE HARDNESS TESTER

TH - 130 Imported Integrated Hardness Tester Pocket Digital type with Impact Device -D, Test Block, support Ring and Battery Charger, Accuracy : ± 0.8% Hardness Value in : HRC,HRB, HRA, HV, HB, HS and HL. Test Tip : Tungsten Carbide. Mx. Sample Hardness : 980 HV Provided with standard Accessories, carrying case with master and test Certificate.

“TIME” IMPORTED HARDNESS TESTER WITH PRINTER & SEPARATE PROBE

Portable Hardness Tester TH l3Oplus*

“YAMAYO” – Imported make

MAIN FEATURES: -

- Self contained (Impact Device D integrated): No cables. 

- Integrated impact direction sensor.

- Highly accurate (± 4HL) in any impact direction (360°) – 

automatically. 

- 128*64 dot matrix high contras LCD for optimum viewing in all 

conditions. 

- Full USB communication with PC, software included free of charge. 

- Easy calibration and Intelligent sleep mode.

- Integrated display of results for all common hardness scales. 

- Internal storage of data with day and time capacity: 560 reading.

- Printer: Wireless (Bluetooth) mini printer.

- Battery: 3 AAA Rechargeable Ni MH(3.6V/800mAH)

WEBSTER HARDNESS TESTER FOR ALUMINIUM (USA / CHINA)

Portable checks hardness of varieties of shapes of Aluminium & Aluminium Alloys, Brass, Copper tubings, Extruded flat stock etc. Webster hardness Tester also identifies heat treated from non heat treated parts - segregated materials in stock shows. Differentiates between soft or hardened materials. Easy to read dial to indicate with 20 gradients as ‘go’ & ‘no go’ gauge - checks up 1/4 “materials”.

BARCOL HARDNESS TESTER USA

Portable hand held for testing the Hardness of Alumiium & Aluminium Alloys, Copper, Brass Fibreglass & Plastics Sheets .Components with 2 spaces indenter complies with ASTM D-2583 Standard. Range 25-150 Brienell. 

RUBBER HARDNESS TESTER “A”

0-100 Shore ‘A’ Scale for vulcanized and soft rubber, provided with test master. Accuracy: 1 Degree. 

RUBBER HARDNESS TESTER “D”

0-100 Shore ‘D’ Scale for vulcanized and soft rubber, provided with test master. Accuracy: 1 Degree.

TQC

HARDNESS PEN

The TQC Hardness Pen is a pocket instrument for testing the hardness and wear/scratch resistance of materials such as coatings, lacquers, plastics or related products. A tungsten carbide tip is drawn over the surface with a defined constant pressure. The pressure on the tip can be changed using the slide or by changing the spring. A visual mark on the surface after use of the TQC Hardness Pen indicates a fail of the surface hardness or wear/scratch resistance. Can be used on flat and curved surfaces.

There are 2 versions available, the Standard and Pro.

The Standard version is supplied with 3 springs and one tip:
0-3N, graduation 10 g
0-10N, graduation 50 g
0-30N, graduation 150 g
Tip 1mm

The pro version includes the above as well as:
Tip 0,5mm
Tip 0,75mm
Pen holder with guidance wheels, which provides very stable load on tip and makes it easier to apply force.
 
The laser-engraved scale is clearly visible on the grey background.